The Genie Company

G3T-R 3-Button Remote

$37.99 USD

$37.99 USD

Sale Sold out

Genie G3T-R 3-Button replacement garage door opener remotes

G3T-R 3-Button Remote

$37.99

The popular G3T-R Genie 3-Button Garage Door Opener Remote features Genie Intellicode Security Technology to keep your garage secure while you're home or away. The access code is changed on each door activation to prevent unauthorized access to your property. It is also equipped with Auto-Seek Dual Frequency technology, this garage door opener remote will automatically seek either 315 or 390 MHz, which will minimize interference from close surrounding devices and improves overall performance. The 3-Button G3T-R Remote works on up to 3 garage door opener systems manufactured from 1997 to the present. For Genie operators manufactured between 1995 and 1997, this 3-button remote will operate with up to 2 garage doors with the use of the top 2 buttons only. The remote is easily programmable with detailed DIY programming instructions. This 3-button garage door opener remote comes with a visor clip for easy access and storage and a CR2032 battery. It is also small enough to fit right on a key ring. You can even use your G3T-R Genie 3-Button Remote to program and train your built-in car wireless control systems, HomeLink, and Car2U (a Genie exclusive), streamlining operation from your vehicle. This Intellicode 3-Button remote is included with most of our new garage door openers, it can be added as an extra to your Genie system or used as a replacement.

  • Easily programmed to most Genie Intellicode Garage Door Openers with just a few button pushes
  • Equipped with Intellicode Security Technology
  • Auto-Seek Dual Frequency Technology accesses strong, secure signals to minimize interference and improve overall performance
  • Compatible with HomeLink and Car2U Systems
  • This 3 Button remote can operate up to 3 Genie garage door openers manufactured 1997-present or up to 2 openers manufactured from 1995-1997.
  • Simple Storage and Use, Includes a visor clip, CR2032 battery, and detailed instructions. Can also fit on a keyring if desired
  • G3T-R 3-Button Remote is also equivalent to 37330R, G3T-A, G3T-BX
  • Great replacement remote for popular older Genie Intellicode garage door opener remote models such as GICTD-1, GICTD-3, GIT-1, G2T-1, GIT-2, G2T-2, GIT-3, G2T-3, GICT390-1, GICT390-3, GMIC90-2, GMIC90-3, GIFT390-1, GIT390-4, GMI3, GIFTD-1, GIFTD-3, GITD-3, GIC90-1, GIC90-2, GIC90-3, ACSCTG Type III (and more)
  • Looking at the back of your current/ older garage door opener remote? Do you see FCC ID: B8Q 31590T, B8QACSCT, B8Q ACSMT, CHDGTXE, if so, this G3T remote will work for your replacement.

 California Residents:Proposition 65 WARNING

UPC: 050049017446

SKU: 37218R

In Stock! Usually ships within 24 hours.

ASK A QUESTION

  • Does this remote work with the Genie Model 2028?

    Yes, the G3T-R remote is compatible with model 2028.

  • Will this work for model: PMX500IC/B

    Yes, the G3T-R 3-Button Remote is compatible with the Genie model PMX500IC/B.

  • Will this remote work for the Genie pro max chain glide 1/2hp model# PCG650?

    Yes, the G3T-R 3-Button Remote is compatible with the Genie model PCG650.

  • I need to buy remote for this: 1/2 H.P. Model PMX500IC/B Receiver Model ACSR1G. do you have it? Thank you,

    Yes, the G3T-R 3-Button Remote is compatible with Genie model PMX500IC/B.

  • The range of my remotes is only about 10 ft. They used to work from 100 yds away. I've replaced the batteries. What should I check/do?

    The most common cause for lowered remote range is interference.  This can come from multiple sources, see below for help:

    Typically, when we see this low range it is an interference issue rather than the receiver unit. Do you have any other garage door openers close by, sometime those will cause interference? Do you have any LED or CFL bulbs in the garage door opener unit or nearby?  Remove these bulbs and retry range. If improved the issue is the bulbs and you should relocate them. Do you have any appliances in the garage like a refrigerator? If so, please remove power from the items then retry remote function to see if it improves, if it does then the item with power removed is causing the problem. Also, if you live near an airport or air force base these, we have found sometimes can cause interference.

    Please let us know if you need further assistance.

  • will this 3 button remote replace the 2 button remote, ACSGT Type 2?

    Yes, the G3T-R 3-Button Remote is a compatible replacement for the ACSGT Type 2.

  • I chnaged the batties in my G3T-R 3 button remote and the garage door won't open. Help!

    The remote may need reprogrammed.  Please follow the below instructions based on your type of unit:

    To program your remote to a unit with a square PRG/SET button. Go up to the opener on the ceiling and press and hold the square set/program button until you see TWO blue lights and then release it. Press and release it once again and now it should be flashing purple. You now have (30 seconds) to step 3 to 4 ft. towards the door and away from the opener. Press and release the button on the remote that you want to program 3 to 4 times. Make sure that nothing is in the way of the safety beams or it will not close. Now the remote is programmed.

    To program your remote to a unit with a Learn code button.  You will need to locate the "learn code" button on the opener on the ceiling. This is usually on the back of the unit and can sometimes be found under the light cover.  Press and release the learn code button and you will see a red LED light start flashing, now you have 30 seconds to back up 4 to 5 ft. away from the opener on the ceiling and towards the door and press and release slowly and firmly the button on your remote that you want to be programmed 3 to 4 times.  This should operate the door and the remote will then be programmed.

  • My current remote is model G3T-A and has FCC ID B8Q-315390T3. Will this G3T-R remote work for me? I just need an extra remote.

    Yes, the G3T-R 3-Button Remote is a compatible replacement for the G3T-A.

  • Will the G3T-R replace Model GICTD FCC ID B8Q 315390T? If not, which remote is the correct replacement?

    Yes, the G3T-R 3-Button Remote is a compatible replacement for the Genie remote GICTD.

  • Is this remote compatible with the PowerLift 900 garage door opener??

    Yes, the G3T-R 3-Button Remote is compatible with Genie model PowerLift 900.

  • Is this remote compatible with model number gps1200ic?

    Yes, the G3T-R 3-Button Remote is compatible with Genie model GPS1200IC.

  • Will this work with a lift master? Elite series? 1021499a

    No, the G3T will not work with a Liftmaster, however the ACSCTG 2-Button remote is compatible.

  • Will this remote work with model 2020L

    Yes, the G3T-R 3-Button Remote is compatible with Genie model 2020L.

  • What remote(s) will work with the Genie Promax (chain glide) door opener. 1/2 HP Model PCG600. The receiver model on the opener is listed as ACSR1G. I believe it has Series II controls. It was probably purchased in 1995 or 1996. The garage door itself is a single door (for double car space). Thanks.

    The best replacement remote for model PGG600 would be the G3T.

  • Looking to replace remote for Genie Intellicode 1/2 HP Model H4000A

    The best replacement for the H4000A is G3T-R 3-Button Remote.

  • does the battery in the remote face up or down?

    The + sign will face up toward the metal bracket, the - side with no writing will face down toward the circuit board.

  • I am looking for a remote for my genie 1/2 hp. This is info from the back of the unit. model: GCG350L Receiver model: ACSR1G FCC ID: B8Q ACSR1 Thanks

    The G3T-R 3-Button Remote is compatible with model GCG350L.

  • Will this remote work for the Genie Model H2000C, FCC ID: B8Q ACSR1? If not, which remote will work? Thank you.

    Yes the G3T-R 3-Button Remote is compatible with model H2000C.

  • Will this remote work for ACSCTG Type 3?

    Yes, the G3T-R 3-Button Remote is a compatible replacement for the ACSCTG Type 3.

  • I have two 3 button remotes. When I program one to my garage door the other fails to work also I have a keypad that quit working when I programmed one of the new remotes. It seems like they are canceling each other out.

    It sounds like you may have exceeded the total maximum number of remotes, resulting in removing devices when new ones are programmed.  To correct this you can clear the receiver memory of the garage door opener.  To do this follow one of the two below instructions that mostly closely relates to your unit:

    If you have a unit with a learn code button:

    To clear out the programming from your opener, press and hold the learn code button on the motor head until the red led light goes out. Then reprogram each wireless device back into the power head up to seven.

    If you have a unit with a PRG/SET button:

    To clear out the programming from your opener, first go to the belly of the unit. Press and hold the square (set/program) button until you see two blue lights, release. Next press and release that same square button, now you should see a purple blinking light, release. Press and hold the up and down arrows together at the same time for 10 seconds and release. Check to see if your remote is working to make sure that the power head has been cleared. Now you are ready to reprogram any wireless devices that you want to operate your opener.


  • Why isnt the rubber button available for ACSCTG Type 1 ? The remote Still works other wise.....Frustrating when the main actionable part, The rubber button cant be ordered

    Unfortunately due to the age of the remote these buttons for the ACSCTG are no longer available, the best replacement would be the G3T-R.

  • does this remote work with my Genie H4000-07 that I purchased in 2005?

    Yes, the G3T-R is compatible with model H4000-07.

  • Is the G3T-R 3-Button Remote compatible with the Genie Pro Max chain glide Model PCG650 ?

    Yes, it is compatible.

  • Will this remote work with a GPS1200IC Pro Stealth Model?

    Yes, it is compatible.

  • I have a Genie Excelerator......I followed the instructions and easily added the G3T-R. My problem is when I attempt to program a second remote the first remote gets kicked out!

    You will need to clear the memory on the motor unit.  To do this press and hold the learn code button until the red light stops flashing.  This will remove the memory of all remote devices. Then you can reprogram all your remote devices.

  • Is this good for the model H6000A?

    Yes the G3T-R is compatible with the model H6000A.

  • The top or main button doesn't light up the led's, the 2nd one lifts up the green led and the 3rd button button lights up the red led. Is the led supposed to light up when pressing the main ô to button?

    A red or green LED light should appear when you press each button.

  • Will this remote work on a Genie Professional Line Model 2028 garage door motor?

    Yes, it is compatible.

  • do i have to reprogram the remote when i change the battery?

    No. Changing the battery will not require the remote to be reprogrammed.

  • my remote stopped working so i bought a new battery. which way does the new battery go in?

    1. Open the remote case using a washer or coin that fits into the slot at the top of the remote.

    Image replacing battery on a G3T-R Genie 3 Button remote

    2. Replace the battery. Match battery polarity symbols inside the battery housing.

    3. Align components and snap case closed.

  • Additional information: What model is compatible to FCC ID B8Q ACSGT Type 1 Genie Intellicode

    You can use the G3T-R remote, or G1T-BX remote to replace the ACSGT Type 1 remote.

  • have a G3T remote. does it compatible with both Genie Pro Stealth opener and Genie SilentMax™1000?

    Yes! The G3T remote will work with both of these garage door openers.

  • I haven't had this garage remote control for 2 years yet how long is the warranty on this

    All of our Genie accessories have a one-year warranty. Do you have a problem with the remote?

  • I accidentally programmed my remote the wrong way and now both doors open at the same time when I push the one button. How can I Re-program the remote to get it correct?

    What model is your garage door opener? We can provide you the instructions on how to clear the receiver on the garage door opener, then you will need to reprogram all the wireless devices into it.

  • Hello, I am a new home owner who recently had a Genie Garage door opener installed. It works great and I am very pleased with it, but I need something clarified. I was only provided one remote when the opener was installed and I need two of them. It was my understanding that garage door openers came with two remotes. Is this not the case anymore? Any information provided will be greatly appreciated.

    This would depend on which model garage door opener you received. The different models can come with different accessories. If this was a professionally installed model, they may have only purchased one remote with that model. You can add remotes to any Genie garage door opener. If you need assistance with trying to determine which one would work with your model, you can contact Genie customer service at 1-800-354-3643.

  • Is it compatible with Model 3053-TSV?

    Yes, it is.

  • My remote also open my neighbors garage. How do I change the frequency or channel?

    The frequency cannot be changed. The Genie opener has Intellicode technology, so the only way this remote would open your neighbor's door is if it is programmed to their garage door opener as well. Please contact Genie customer service at 1-800-354-3643 for more assistance.

  • Is this remote compatible with 41A5483-1B

    We would need to verify your model number. The numbers you provided are not a Genie model number. Can you check under the light bulb cover to see if there is a model number?

  • Is it compatible with Genie IS550/A?

    Yes, it is!

  • Is the G3t R 3 remote compatible with the older model number G3T?

    Yes, it would be the same remote.

  • Is this remote compatible with the 1024?

    Yes! The G3T-R remote will work with the 1024 model garage door opener.

  • Hi existing remote is G3T-A and bought G3T doesn't work.are they same?

    Yes, they would be the same remote.

  • Does this remote have the number ending in 07 under the clip? I'm trying to program my car to open my garage and I was told that the remote has to be a newer model. I have the one that ends in 03.

    Yes, this remote would be able to be used to program Homelink to your car.

  • Which remote works with the model M450.

    Genie does not have a model M450. None of our Intellicode remotes will work on other brand garage door openers. We do have a Universal remote that will work with certain other brands. You would want to check the compatibility list for your brand.

  • Just purchased this home and no remote for garage door. Would this remote work on Model 7035? Thank you

    Yes, the G3T-R remote will work with the 7035 model garage door opener. I would recommend clearing the garage door openers receiver since you are not sure who may have the old remotes. You can then program the new one(s) in. On page 20 of this manual, it will show you how to clear out the old remotes. If you need assistance we are happy to help as well, please contact Genie customer service at 1-800-354-3643.

  • Our new 3 button remote has been programed to open and close a H4000a. The door opens fine but will not close. Our old remote worked fine but disappeared when we traded our car. The programming instructions were for a different model opener with different looking controls but should work with this remote. Any suggestions to get it working properly?

    This sounds like the safe-t-beams are not letting the remote close the garage door. Is your wall console working to close the door? Do you have to press and hold the wall console in to get the door to close? If so, you would need to check your safe-t-beams. You should have one solid red light and one solid green light on the safe-t-beams. If the red light is blinking you can use the diagnostics chart or contact our customer service at 1-800-354-3643 for assistance.

  • My opener says Intelle 1200. But the sticker says model 4024. Will this remote work. And really I only have one garage door. Is there single button remotes and what is the part number. Thanks

    Yes, this G3T-R remote will work with the 4024 model. If you want a single button remote, you can use the G1T-BX.

  • Is this compatible with ryobi and chamberlain garage door openers?

    No, it is not.

  • Will this remote work on a Genie 2020L Garage Door Opener?

    Yes, it will!

  • Will this work with the model h400a

    Yes, it will.

  • will this work with a genie bluemax model 12a?

    No, it will not. The Genie BlueMax model garage door opener would use the Genie Master Remote, GM3T-R.

  • Does this replace ACSCTG Type 1 remotes?

    Yes, this remote can replace the ACSCTG Type 1 garage door opener remote.

  • Is this product compatible with the GCG350ML?

    Yes, it is!

  • is the g3t-r compatible with model #cm76ooic/a

    Yes, it is!

  • will this remote work as replacement for GT90-3 remote

    You would want to use a Genie Master Remote, model GM3T-R.

  • Is this compatible with a Marantec Synergy 260?

    No, this remote will not work with a Marantec garage door opener.

  • Will a remote from genie B8Q GT50 work with the 3 button remote?

    You would need the Genie Master Remote, GM3T-R.

  • Is this compatible with model 1/2 H.P MODEL PMX500IC/B Receiver model ACSR1G FCC ID: B8Q ACSR1

    Yes, it is!

  • Is this remote compatible with chamberlain model 3245 I Manufacture date 12/08

    No, it is not.

  • Hi, Is it compatible with a 1/2 H.P. MODEL PCG650? Thanks

    Yes, it is!

  • I just bought an older house with a Genie Professional garage door opener. There is no other identification. There is a separate Radio Frequency box with FCC ID B8Q8KL but I cannot find a "learn" button anywhere (I have taken the lid off). There is no Learn button on the opener or under the light cover. The main cover seems permanent. There are no remotes left behind. Is there a replacement remote available? How would I program it if there is one? Thank You!

    Does the box have dip switches inside of it? Are you able to send a picture of it?

  • IT IS COMPATIBLE WITH MODEL GMI-3BL

  • Is this compatible with an Overhead Door Legacy model 496CD?

    Yes, it is!

  • Is This Compatible with Model 3024

    Yes, it is.

  • Is this remote compatible with a Powermax 1500 Model 4062 garage door opener and will it replace the G3T (FCC ID: B8Q 315390T) remote?

    Yes, it is!

  • The remote works great on our Henie - will it also work on our Liftmaster Security +?

    The G3T-R remote will not work with a LiftMaster brand garage door opener.

  • Is this compatible with 1/2 HP Genie Model H6000A

    Yes, it is!

  • My remote isn't closing the garage door. What does this mean?

    This could be a couple of different issues. Is the remote opening the garage door, just not closing it? If so, that sounds like there may be a problem with the Safe-T-beams (they could just be misaligned). If the remote does not open or close the garage door, then it may need a new battery, or need to be reprogrammed to your garage door opener. Do you have other wireless devices that are working?

  • Is it compatible with 1/2 H.P. PMX500IC?

    Yes, it will!

  • Is the G3T-R 3 button remote compatible with the Genie GX 9000 garage opener?

    No, the G3T-R remote will not work with the GX9000 model garage door opener. You would need the GM3T-R Genie Master Remote.

  • Which remotes are compatible with models 2020L and 3060L-07?

    The 2020L and 3060L-07 model garage door openers are both Intellicode models and can use any of our current garage door opener remotes. The G3T-R remote will work fine if you have both and want to use one remote to operate both of them (you will program a separate button for each door).

  • Is it compatible with the CGC 350 L

    Yes, it is!

  • Looking to replace current remote. It is a Genie pro 82. What one shouldI purchase. Thankyou for your help.

    You will need the Genie Master Remote, model GM3T-R.

  • Looking for a remote that will work. The one I have now is a AT85P.

    You can use the Genie Master Remote, GM3T-R.

  • Will this remote work with model GCG350L?

    Yes, it will!

  • Is this remote compatible with a GPS1200IC Opener from 2004

    Yes, it is!

  • Is this remove compatible with model CM86001 C/A? If so, the programming instructions are not clear, as the buttons are not the same on the door opener.

    Yes, this will work with the CM8600IC/A model garage door opener. You will need to press and release the learn code button on the powerhead that is under the light bulb cover. Press and release it one time, then take the new remote step a few feet away and press and release the button you want to program on the remote three to four times slowly. The door will move and the remote is then programmed.

  • how do i connect this remote without a learn button?

    This remote will only work with Genie Intellicode model garage door openers, these would all have a learn code button. This remote will not work with fixed code (dip switch style) garage door opener. Is that what you have?

  • I have a G3T remote. Is the G3TR a replacement for it? I'm having programming issues with my Homelink in my 2019 mustang.

    Yes, it is the correct one.

  • I accidentally programmed both doors to operate on one button. How to reset the remote buttons So the one button does not open and close both doors at the same time.

    What model garage door opener do you have in the garage?

  • Set up was easy once I looked at the garage unit. However, we bought two to replace the old set. The problem is when I program one remote and test it, it works fine. But when I program the 2nd remote and test it, it works fine, HOWEVER, the 1st remote no longer works. How do we get 2 remotes to program to one unit for one garage door?

    It sounds like you have a unit that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven.

  • Hi. Just moved into a new house with a Genie 2128 garage door opener installed. Would like to know the range of the signal to operate the 3 button controller. It seems to only work with in a 15 foot radius

    The range can differ due to environmental surroundings in or near your garage. However, it should be more than 15 feet. Do you have LED light bulbs in the garage door opener?

  • Is this remote compatible with model number 3062?

    Yes, it is.

  • Will this work with model 3022?

    Yes, it will!

  • I have one of these remotes, can I get a second to work on the same door for my wife's car?

    Yes, you would be able to purchase a second remote to program to the garage door opener. Then both remotes would open the door.

  • Will this work with 1/2 HP Model ISL950/A?

    Yes, it will!

  • I have a genie excelerator. The current remote has G3T-A on the back of the remote. I need another remote. Which one? Can I use the current one and then program the new one so both work?

    Yes, you can add another remote. Any of our current Genie remotes are all Intellicode models. They will all work with the Genie Excelerator.

  • I already have a chamberlain universal remote, when I programmed the genie 3-button it worked but the chamberlain didn't any longer. Reprogrammed the chamberlain and now the genie doesn't work... any suggestions?

    It sounds like you have a unit that can hold up to seven wireless devices. This includes any old remotes or wireless devices that have been programmed. Once there is seven, any new remote programmed will kick the last one out that was programmed. To fix this, you can clear the receiver. To clear it press and hold the learn code button in until the red led light goes out. Then reprogram each wireless device back into the powerhead up to seven.

  • I this compatible with model CM8600IC/A? After the programming the control opens the door but doesn't close it.

    Yes, the G3T-R remote does work with the CM8600IC/A. If your door is not closing with the remote, you may want to check your Safe-T-Beams. Here are a few things to check. Both of the safety sensors should be lit and solid one red, and one green. If one or both of them are out it is an indication there is a wiring issue. You will want to first be sure the connection on the beams and head are secure. If only one light is off, please disconnect the beam that is not lit and connect it to the wiring on the side that is lit. If the beams light up replace the wiring to the beam on the non-lit side, if not replace the beams. If both are out you will want to short wire the beams directly to the head you will disconnect the beams and wire them to the terminals on the head that they are currently connected to using two short pieces of 18-20 gauge bell wire. If the beams lite up you will need to replace the wiring, if not replace the beams. If one of the beams is blinking please be sure that the lenses are clean, clear from obstructions, and properly aligned. Please count the blink pattern and let us know what the results are. Also, check to see if you can press and hold the wall console in to get the door to close. If you cannot, try removing the safety beam wires from the powerhead, then try constant pressure on the wall console to close the door. If you still cannot, once the safety beams are not wired, this may be a problem with the circuit board.  You can also call 1-800-354-3643 for further assistance.

  • Will this work with my Intellicode Is550/a? My old remote does not have any numbers on the back.

    Yes! The G3T-R remote will work with the IS550/A model garage door opener.

  • Will this remote control work with a Lift Master opener?

    No, it will not.

  • Is this compatible with the ISD 990?? Thanks in advance

    Yes, it is!

  • How do you use this remote, to program a Ford HomeLink system? The description says its compatible, but I've been unable to program simply by holding down 1 of the homelink buttons and the G3T-A together, until the homelink flashes, which is the normal procedure.

    After holding down the remote and the Homelink button, there are more steps. See the instructions here or watch the video here.

  • Will this replace a ACSCTG Type 3 controller?

    Yes, it will!

  • Is this remote compatible with GR390-12?

    No, it is not. You would need the Genie Master Remote, (GM3T-R).

  • Will 3 of these GT#-R 3 button remotes, used in 3 different cars, be compatible with each other? Each of the 3 cars must be able to open all 3 of the different garage doors. Two, out of three, of the garage door openers are Genie Excelerator Model ISD-990. The third garage door opener is a Genie Model 3060L-07/M.

    Yes! The G3T-R remotes would work in all 3 cars on all 3 of your garage door openers.

  • Well this remote work with a model number ACSCTG type 2

    Yes, it will!

  • I have the G3T-A remote. Is it compatible with a craftsman 3/4 HP garage door opener?

    No, it is not.

  • If I have this already programmed and buy two more for my other cars can those be programmed just as easily as the first one did?

    Yes! They would all program the same way. (Just as easy!)

  • Will the Genie G3T-A remote work with model overhead door 450 A

    No, it will not.

  • What does the red light indicate on the G3T-R remote when you hit the buttton. Was green now is red and the remote works intermittently

    The red and green lights switch the remote between Intellicode l and ll. For troubleshooting on the intermittent activity please contact Genie customer service at 1-800-354-3643.

  • Is this remote compatible with a Genie Pro Max Model PMX 300K/A, FCC B8Q ACSR?

    Yes, it is.

  • I have purchase two genie G3T-R and cannot program either one to my lift Genie silent max 1000, what can be wrong ?

    The G3T-R remotes will work with the SilentMax 1000 model garage door opener. Please contact Genie customer service at 1-800-354-3643 for assistance with programming.

  • Is this remote compatible with FCC ID:B8Q ACSR1

    Yes, it is!

  • Is this compatible whit Chamberlain with purple button?

    No, it is not.

  • It is compatible with the model -Merik 411,511, 711 ??

    No, it is not.

  • i need a replacement remote for my genie garage door Model 2560 and i am not sure which are compatible.

    The 2560 can use any of the current Genie remotes, they are all Intellicode models.

  • Hello guys, I have a 1/2 hp model isd990, Im trying to get a remote for my car, can you please tell me which remote is compatible? Thanks!

    You can use any of the current Genie remotes with the ISD990. The current remotes are all Intellicode models. View our current Genie remotes.

  • Does G3T-R 3-Button Remote works with Chamberlain opener?

    No, it will not.

  • Will this work with model G4050?

    No, it will not. You would need the Genie Master Remote (GM3T-R).

  • Also I wont need our old remotes that go to our genie opener will I? Bc we lost those years ago and are just now getting around to finding a replacement.

    You do not need your old remotes to program new ones to your garage door opener.

  • Is this 3 button remote compatible with my genie 1/2 H.P. Model 2020L Reciever Model Number 315390R1 ?

    Yes, it is.

  • Can the G3T-R-3 be programmed to open gate at gated community. I was able to program the car remote to open the gate.

    This would depend on the receiver on the gated community. Do you know what the receiver model and frequency are?

  • how to replace the battery: plus up or down? Thanks.

    The plus side of the battery will face the "back" of the remote. (The part with the visor clip).

  • Hi.i buy new house and old owner they lost remote,and i check with the top plastic,they have 1/2 hp model h4000a Receiver model ACSR3. So now,which one i can oder remote same model with my garage.thankyou

    You can use any of of current Genie remotes that we sell now. They are all Intellicode models which will work with the H4000A model garage door opener.

  • Is this opener compatible with the 7600IC/A model opener?

    Yes, it is.

  • Is this compatible with mdel 1035?

    Yes, it is!

  • Do you offer just the circuit board for this remote or at least have pictures of it?

    We do not sell just the circuit board for any of our remotes.

  • Chamberline compatible?

    No, this will not work with a Chamberlain model garage door opener.

  • Is this remote compatible with model acsr3

    Yes, it is.

  • Is this remote compatible with the CM7600IC/A, 1/3 H.P. Model?

    Yes, it is.

  • Is it compatible with Genie Pro 1024

    Yes, the G3T-R remote will work with the Genie Pro 1024 model garage door opener.

  • What's the distance range on this remote, as of in how far from the garage will it work? Thanks

    The normal range on the remote can be anywhere from 25-100 feet. This may vary depending on the environmental factors that are in/ around your garage.

  • Is this remote compatible with Blue Max model cm 7500 series

    No, it is not. You would need the Genie Master Remote, GM3T-R.

  • Is it compatible with a gitr-3

    Yes, it is.

  • Is this remote compatible with model GCG350ML?

    Yes, it is!

  • is this remote compatible with SERIE 3042

    Yes, it is!

  • Is this remote compatible for my genie silent max 1000 series

    Yes, it is!

  • Will this remote work on a GCG 350, 1/2 HP?

    Yes, it will!

  • Is this compatible with Marantec garage openers

    No, it is not.

  • Will this remote work with a chamberlain c455 garage door opener?

    No, it will not. The Genie Intellicode remotes are not universal to work with other brand garage door openers.

  • Do you sell circuit board for G3T-R3 and if so, cost?

    We do not sell the boards for the remotes as a separate item.

  • Is this compatible to H2000C

    Yes, it is!

  • Is the G3T-R 3-Button Remote compatible with my garage door model#1028, 2028

    Yes, it is!

  • Is this remote compatible with model h6000a

    Yes, it is!

  • Will it work with model 3055?

    Tes, it will!

  • How do you install replacement battery?

    1. Open the remote case using a washer or coin that fits into the slot at the top of the remote. 2. Replace the battery. Match battery polarity symbols inside battery housing. 3. Align components and snap case closed.

  • will this work to replace the G3T-A for model 2562 opener

    Yes, it will!

  • Is there instructions how to set remote

    The G3T-R garage door opener remote programming instructions can be viewd online, and they also are included with the remote.

  • Will this remote work for a 2560M Unit

    Yes, it will!

  • If I replace the battery do I need to reprogram.? I see the light on the opener is green and the receiver in the garage is getting the signal but it is not opening.

    You may have to reprogram the remote depending on how long the battery was dead. You can follow the programming instructions on this page or contact customer service at 1.800.354.3643.

  • Is this or another remote compatable with model S09500? What year is this opener? Thanks.

    You would need the Genie Master Remote model GM3T-R. The year can be determined by a date code on the garage door opener. For assistance, please contact Genie customer service at 1-800-354-3643.

  • Why does it stop working? Does it have some kind of battery?

    The G3T-R remote does have a battery. It uses a 3 Volt CR2032 battery.

  • Will this remote work on the Genie garage door opener model H4000-07/M?

    Yes, it will!

  • I have a Genie Pro Screw Drive garage door operator, ICA Series w/ Genie Intellicode and series II electronics, installed in 2001. will the G3T-R 3 button remote work with my operator?

    Yes, it will.

  • Is this remote compatible with PMX500 Genie Pro Max?

    Yes, it is!

  • What are the three buttons each used for on the G3T-R- 3 button?

    Each button can be programmed to a different Genie Intellicode garage door opener. So if you have more than one garage door or more than one garage, you can program a different button to each one.

  • Will this remote work with model #696CD/B?

    Yes! The G3T-R remote will work with the 696CD/B garage door opener.

  • Is the G3T-R compatible and can replace the GT90-1?

    No, you would need the Genie Master Remote model GM3T-R to replace the GT90-1.

  • Is this remote compatible with Genie 1/2 H.P. Model G5000?

    No, it is not. You will need the Genie Master Remote, GM3T-R.

  • Will this remote work with Model 2028?

    Yes, it will!

  • Is this remote compatible with the 2060 L model?

    Yes, it is!

  • I have a PMX500IC/B opener, what replacement remote do i need?

    You can use this G3T-R remote or any of our other Intellicode remotes to work with the PMX500 IC/B.

  • Is it compatible with a Model GPS1200 opener?

    Yes, it is!

  • Hello Please confirm compatible with G3T-A remote

    Yes, it is!

  • Is this compatible with the older H6000a model?

    Yes, it is!

  • Is this compatible with gt912 model

    No, it is not. You will need the Genie Master remote model GM3T-R.

  • I have model PCG700ML and need a replacement remote

    Hi! You can use this G3T-R remote, or if you would rather have a one-button remote, you can use the G1T-BX model.

  • Is this compatible with model 2022/2024/2042?

    Yes, it is.

  • Which remote is compatible with opener Model IMS 1000? r

    Any of the remotes on this website will work with this unit. They are all Intellicode.

  • Will this work with, dual frequency conversion kit GIRUD-1T PART#36359R?

    Yes, it will.

  • Is this remote compatible with GICT 390?

    Yes, it is.

  • Is this compatible with model GCG350L?

    Yes, it is.

  • Is this remote compatible with the model 1028?

    Yes, it is!

  • is this remote compatible with model 3060L

    Yes, it is!

  • Is this compatible with model 2040 L

    Yes, the G3T-R Genie Intellicode remote will work with the 2040L model garage door opener.

  • Is it compatible with model 2060L-07/M

    Yes, it is!

  • is this remote, model # B8QACSCT ACSCTG TYPE 1 compatible with G3T-R 3-Button Remote?? will there be instructions as to how to set it up/

    Yes it is compatible, and it will come with instructions on how to program.

  • Hello I would like to know if this remote is compatible with the model number H 6000–07

    Yes it is!

G3T Remote Programming Video Instructions

PDF Printable Programming Instructions for the G3T-R remote

G3T-R or G3T-BX 3-Button Intellicode Remote Programming Instructions

If your Genie garage door opener remote is not working, it may need to be reprogrammed. Follow the instructions below to reprogram the Genie remote just like when it was new, even if it worked before.

1- Putting the Garage Door Opener into Programming Mode

New Genie® Garage Door Openers

1. Press and hold the program button until the round LED turns blue, then release.

2. The small round LED light will go out and the long LED will begin flashing purple.

Proceed to step 2.

                                -OR-

Genie® Openers and External Add On Receivers that were Manufactured between 1995 to 2011

1. Locate the Genie garage door opener learn button. Press & Release the Learn Code button once. The red LED will begin to flash.

Proceed to step 2.

2- Programming the (G3T) 3-Button Remote to your Garage Door Opener

NOTE: Once in programming mode, you will have approximately 30 seconds to perform this step

1. Pull the protective battery tab from the remote.

Image removing pull tab from a new G3T-R Genie remote

Note: While programming remote buttons, stand at least 5 feet away from the opener. This ensures you have proper communication between the remote and the opener.

2. Slowly press and release the remote button of your choice two times. The opener LEDs will flash and go off, indicating you have successfully programmed your remote.

3. Press and release the same button a third time and door will open or close. It is possible to press the remote button too quickly or lightly. If the LEDs do not go OFF, press the remote button several more times to achieve confirmation.

3- Lost or Stolen Remote/Erasing all Remotes

Newer Genie® Garage Door Openers

1. Press and hold the program button until the round LED turns blue, then release.

2. Press and hold the Up(+) Down (-) buttons at the same time, until both LEDs flash blue and go OFF.

Genie® Garage Door Openers and External Receivers Manufactured between 1995 to 2011

• To erase all of the remote devices from other types of Genie® garage door openers, Press and hold the Learn Code Button until the LED stops blinking.

Start at step 1 to reprogram your remotes.

NOTE: Clearing remote control memory from the power head will clear ALL programmed remotes and keypads. Your opener will no longer recognize any signal from any remote device, including a missing remote device.

4- Replacing the remote battery

Replace the G3T remote battery with CR2032 coin cell battery.

1. Open the remote case using a washer or coin that fits into the slot at the top of the remote.

Image replacing battery on a G3T-R Genie 3 Button remote

2. Replace the battery. Match battery polarity symbols inside the battery housing.

3. Align components and snap case closed.

NOTE: For openers manufactured between 1995-1997, use the two upper buttons on the remote. Made after 1997? Use any button for programming.

FREE SHIPPING ON ALL US ORDERS 17.99 AND UP